PCM Cooling Chef Jacket, Phase Change Cooling Chef Uniform for Kitchen High-Temperature Work
Professional PCM cooling chef jacket with hidden PCM pockets, breathable underarm mesh panels, moisture-wicking quick-dry fabric. Ergonomic fit, durable stitching, optional short sleeve. Perfect for kitchen catering staff to get heat relief in hot working environments. Custom sizes supported.
Specifications
| Parameter | Details |
|---|---|
| Fabric | Lightweight Moisture-Wicking Quick-Dry Fabric |
| Size | Customizable, short sleeve optional |
| Color | White |
| Cooling System | Hidden PCM phase change cooling module pocket |
| Ventilation Feature | Breathable mesh panels at underarms |
| Design Feature | Ergonomic 3D cut, precision stitching, utility sleeve pocket |
| Target Users | Chefs, kitchen staff, catering workers |
| Usage | PCM modules absorb ambient heat for sustained cooling in hot kitchen |
| Working time | 2-4 hours per pack set |
| Voltage | None, passive |
Application scenarios
Where this model is used
Inside the PCM phase change system
Frozen phase-change packs absorb body heat at a constant temperature. No power, no pump, no ice water, and the packs are re-frozen between shifts in any standard freezer.
How it works
- Freeze the packsLay the PCM packs flat in a freezer until solid. A normal freezer is enough; no specialised equipment is required.
- Load the vestSlide the packs into the chest and back pockets before putting the garment on.
- Cooling at a fixed temperatureThe packs melt at a set point, so the garment stays cool instead of gradually warming up.
Compare the seven routes
| Technology | Runtime | Power |
|---|---|---|
| Water circulation | 4-8 h | 12 V DC |
| PCM phase change | 2-4 h | Passive |
| Peltier / TEC | 3-5 h | 12-24 V DC |
| Evaporative | 4-6 h | Passive |
| Fan cooling | 8-12 h | 12 V DC |
| Battery & fan kits | 8-12 h | 12-50 V DC |
| New design line | 4-10 h | 12-50 V DC |
Runtime and power are typical figures for the range, not guarantees for a single model. The full specification is in the table above.
Before you order
How long does one frozen set last?
2 to 4 hours per set. Runtime depends on the number of packs used and the workload.
How do I recharge it?
Refreeze the packs. Two sets in rotation cover a full shift with no battery management at all.
Is it allowed in areas with battery restrictions?
Yes. The garment is completely passive, which is why it is common in fuel handling, kitchens and rescue work.
How it works
Frozen phase change packs sit in pockets over the chest and back. The material melts at a fixed temperature, absorbing body heat without any power source, and stays at that temperature until the phase change completes. Packs are swapped for a fresh set and re-frozen between shifts.
Applications
- Fire and rescue rehab cycles
- Road works and asphalt paving
- Food processing and cold chain
- Sites where batteries are not allowed
Working temperature
Effective between 30 °C and 50 °C ambient, with the best result in still air where the pack stays below melting point.
Customisation and MOQ
MOQ is 50 pieces for stock models and 200 pieces for custom colour, logo, reflective tape or packaging. Samples are ready in 7 to 10 days and bulk production takes 25 to 35 days after approval. Battery packs and fan kits carry a 12 month warranty on electrical parts.
Questions about this model
How long does one set of packs last?
Two to four hours at 35 °C ambient depending on workload, and the pack set can be re-frozen more than 1,000 times.
How do I choose a size for close-fitting wear?
Size L fits a 96 to 104 cm chest with packs inserted. Measure over a base layer, and size up for wear over a coverall.
Can I add reflective tape or a company logo?
Yes, reflective tape, logo embroidery and printed panels are available from 200 pieces.

