Peltier Grey Evaporative Cooling Vest | Composite Fabric Ice Water Cooling Work Vest for Outdoor & Factory

This grey water evaporative cooling vest is made of premium composite fabric, breathable and skin-friendly, avoiding sticky sweat during wearing. It works based on water evaporation cooling principle to dissipate body heat and deliver continuous breathable cooling for hot environments. With simple grey appearance and ergonomic cut, it fits well without restricting movement and is easy to put on and take off. Suitable for factory workshops, outdoor work and daily trips. Sizes can be customized, ideal heat prevention gear for summer high-temperature scenarios.

Description

Specifications

Item Specifications
Product Name Peltier Cooling Garment Grey Water Evaporative Cooling Vest
Product Type Cooling Apparel / Functional Work Cooling Vest / Functional Heat Prevention Clothing
Fabric Composite Fabric
Core Function Ice water refrigeration, high-efficiency cooling, water evaporation cooling, breathable heat dissipation, long-lasting heat protection
Application Scenarios Factory workshop, outdoor operation, daily heat prevention, high-temperature posts
Target Users High-temperature workers, outdoor operators, people needing heat protection
Color Grey, contact customer service for details
Size Customizable
Working time 3-5 hours on a 20,000 mAh pack
Voltage 12-24 V DC

Inside the Evaporative system

Water-soaked fabric cools by evaporation. The lightest and lowest cost route, and the only one that needs no battery, no pump and no ice.

How it works

  1. Soak the panelsSubmerge the cooling panels in water for a few minutes until the fabric is fully saturated.
  2. Wring onceRemove the excess water so the garment does not drip during work.
  3. Wear and top upEvaporation does the cooling. Re-wet the panels at breaks to restore performance.

Compare the seven routes

TechnologyRuntimePower
Water circulation4-8 h12 V DC
PCM phase change2-4 hPassive
Peltier / TEC3-5 h12-24 V DC
Evaporative4-6 hPassive
Fan cooling8-12 h12 V DC
Battery & fan kits8-12 h12-50 V DC
New design line4-10 h12-50 V DC

Runtime and power are typical figures for the range, not guarantees for a single model. The full specification is in the table above.

Before you order

How long does it stay cool?

4 to 6 hours per fill in dry heat. Re-wetting takes a minute and needs only a tap or a bottle.

Does humidity affect performance?

Yes. Evaporative cooling works best in dry heat; in very humid conditions a fan or PCM route performs better.

Is there any power supply?

None. There is no battery, no pump and no electronics to maintain.

Applications & FAQ

How it works

The outer fabric is soaked in water and stays wet for hours. Air moving across the fabric evaporates the water, which pulls heat from the body. No pump, no battery and no ice are needed; performance depends on ambient humidity.

Applications

  • Outdoor construction and roofing
  • Landscaping and utility crews
  • Warehouse and logistics
  • Dry heat regions below 40% relative humidity

Working temperature

Effective from 30 °C to 50 °C ambient when relative humidity stays below 40%; effect drops sharply above 70% humidity.

Customisation and MOQ

MOQ is 50 pieces for stock models and 200 pieces for custom colour, logo, reflective tape or packaging. Samples are ready in 7 to 10 days and bulk production takes 25 to 35 days after approval. Battery packs and fan kits carry a 12 month warranty on electrical parts.

Questions about this model

How long does an evaporative vest stay effective?

Four to six hours per fill in dry heat, and it can be re-soaked on site from any water source.

How do I choose a size for close-fitting wear?

Size L fits a 96 to 104 cm chest. The vest is worn as an outer layer, so choose your normal workwear size.

Can I add reflective tape or a company logo?

Yes, from 200 pieces, including hi-vis colourways.

Get More Details

For custom options, bulk pricing or lead time, please contact us.

Ask Us A Question