Adjustable Multi-Gear Smart Fan Semiconductor Cooling Vest, Outdoor High Temperature Heat Protection Workwear
Adjustable multi-gear smart fan vest with semiconductor refrigeration cooling function. Made of hemp blend fabric in light grey, available in multiple sizes. Available for bulk order, ideal for summer outdoor high-temperature working operations.
Specifications
| Item | Specifications |
|---|---|
| Product Category | Vest / Waistcoat |
| Fabric Material | Hemp Blend, 98% Polyester |
| Lining Composition | Spandex |
| Color | Light Grey |
| Size | M,L,XL,XXL,XXXL,XXXXL |
| Size Tolerance | 1‑3cm |
| Function | Multi-speed Smart Fan + Semiconductor Cooling |
| Application Scenarios | Work, Outdoor High-temperature Operation |
| Season | Summer |
| Working time | 3-5 hours on a 20,000 mAh pack |
| Voltage | 12-24 V DC |
Application scenarios
Where this model is used
Inside the Peltier / TEC system
A semiconductor plate moves heat from the back panel to a heat sink. Reversing the polarity turns the same garment into a heated work jacket for cold shifts.
How it works
- Connect the packClip the 12 to 24 V battery into the controller. No water or ice is needed.
- Move heat with the TEC plateThe Peltier element pulls heat from the body side of the panel and releases it through the heat sink.
- Reverse for heatingFlip the polarity and the same plate warms the back panel instead of cooling it.
Compare the seven routes
| Technology | Runtime | Power |
|---|---|---|
| Water circulation | 4-8 h | 12 V DC |
| PCM phase change | 2-4 h | Passive |
| Peltier / TEC | 3-5 h | 12-24 V DC |
| Evaporative | 4-6 h | Passive |
| Fan cooling | 8-12 h | 12 V DC |
| Battery & fan kits | 8-12 h | 12-50 V DC |
| New design line | 4-10 h | 12-50 V DC |
Runtime and power are typical figures for the range, not guarantees for a single model. The full specification is in the table above.
Before you order
How long does it run on one battery?
3 to 5 hours on a 20,000 mAh pack. Higher capacity packs extend runtime proportionally.
Does it work in both hot and cold conditions?
Yes. The cooling and heating modes share the same hardware, so one garment covers both seasons.
Where is the noise coming from?
The heat sink fan. It sits on the back panel, away from the wearer's ears.
How it works
Two semiconductor plates sit against the upper back and draw heat away when current flows, with a fan-driven heat sink releasing it outside the vest. Reversing polarity heats the plate instead, so the same garment works in cold stores.
Applications
- Welding and fabrication shops
- Foundry and glass plant work
- Confined space and tank entry
- Cold store and freezer work
Working temperature
Cooling mode is rated from 25 °C to 50 °C ambient; heating mode from -20 °C to 10 °C.
Customisation and MOQ
MOQ is 50 pieces for stock models and 200 pieces for custom colour, logo, reflective tape or packaging. Samples are ready in 7 to 10 days and bulk production takes 25 to 35 days after approval. Battery packs and fan kits carry a 12 month warranty on electrical parts.
Questions about this model
How long does a Peltier vest run on one charge?
Three to five hours on a 20,000 mAh pack at medium setting; runtime scales with battery capacity.
How do I choose a size for close-fitting wear?
Size L fits a 96 to 104 cm chest over a shirt. The plate housing adds about 2 cm at the back, so size up when wearing over a coverall.
Can I add reflective tape or a company logo?
Yes, from 200 pieces, with hi-vis and reflective options available.

