Backpack Style Water Circulation Cooling Vest, Unisex Water Cooling Waistcoat for Outdoor Sports
This cardigan-style water circulation cooling vest is made of composite fabric. It comes with built-in silicone water tubes and water tank bag to form a circulating water cooling system, equipped with inner liner. Two options available: separate water cooling system or full set cooling vest. Unisex design for adults, ideal for camping, fishing, travel, hunting, cycling and various outdoor activities.
Specifications
| Item | Specifications |
|---|---|
| Fabric | Composite Fabric |
| Size | Customizable |
| Style | Cardigan, non-hooded, non-detachable |
| Gender | Unisex for men and women |
| Target Users | Adults |
| Package Type | Single piece with inner liner |
| Filling Material | Silicone water tube + water tank bag |
| Configuration Options | Water cooling system (vest not included), complete water cooling vest |
| Quality Grade | Qualified product |
| Outdoor Application | Camping, fishing, travelling, hunting, cycling and other general outdoor activities |
| Working time | 4-8 hours per fill, about 4 hours at 35 C |
| Voltage | 12 V DC |
Application scenarios
Where this model is used
Inside the Water circulation system
Chilled water is pumped through a close-fitting loop against the skin. The heaviest duty of the seven routes, and the only one that carries heat away from the body instead of storing it.
How it works
- Chill the reservoirFill the reservoir and pre-chill it before the shift. An ice pack shortens the preparation time in extreme heat.
- Pump through the loopA small 12 V pump pushes water through tubing stitched against the chest and back.
- Heat leaves with the waterWarmed water returns to the reservoir, so body heat is removed rather than trapped in the fabric.
Compare the seven routes
| Technology | Runtime | Power |
|---|---|---|
| Water circulation | 4-8 h | 12 V DC |
| PCM phase change | 2-4 h | Passive |
| Peltier / TEC | 3-5 h | 12-24 V DC |
| Evaporative | 4-6 h | Passive |
| Fan cooling | 8-12 h | 12 V DC |
| Battery & fan kits | 8-12 h | 12-50 V DC |
| New design line | 4-10 h | 12-50 V DC |
Runtime and power are typical figures for the range, not guarantees for a single model. The full specification is in the table above.
Before you order
How long does one reservoir fill last?
4 to 8 hours depending on ambient temperature and pump speed. Crews on double shifts usually carry a second reservoir and swap it at the break.
Does it need ice?
No. Pre-chilled water is enough for normal summer conditions. Ice or a freezer pack is only used where radiant heat is extreme.
Can it run from a vehicle or generator?
Yes. The 12 V DC input runs from a vehicle socket, a 12 V battery pack or a standard adapter.
How it works
A 12 V DC pump pushes chilled water from the back reservoir through four channels of press-seam tubing that sit against the chest and spine. Water returns to the reservoir, is re-cooled by the ice pack, and recirculates. Flow rate is fixed at the factory; switching the pump off converts the garment into a passive vest for breaks.
Applications
- Foundry and steel mill floor work
- Underground mining and tunnelling
- Boiler rooms and utility plants
- Outdoor construction above 40 °C
Working temperature
Rated for continuous work between 30 °C and 55 °C ambient. Below 30 °C the pump is usually switched off.
Customisation and MOQ
MOQ is 50 pieces for stock models and 200 pieces for custom colour, logo, reflective tape or packaging. Samples are ready in 7 to 10 days and bulk production takes 25 to 35 days after approval. Battery packs and fan kits carry a 12 month warranty on electrical parts.
Questions about this model
How long does the pump run on a 20,000 mAh pack?
About 8 hours at medium speed, which covers one full shift. A second pack doubles coverage for 12 hour rotations.
How do I choose a size for close-fitting wear?
Measure chest circumference and add 4 cm for the tubing layer. Size L fits a 96 to 104 cm chest; sizes run S to 3XL, and custom grading is available from 200 pieces.
Can I add reflective tape or a company logo?
Yes. Reflective tape, logo embroidery and printed panels are available from 200 pieces, with artwork approval before production.

