EC-A-024 Heat Cold Exchange Temperature Control Vest, Bidirectional Cooling & Warming Functional Thermostatic Vest

EC-A-024 heat and cold exchange temperature control vest is made of premium composite fabric, skin-friendly and breathable for sweat-free comfort in various environments. Equipped with heat-cold exchange system for bidirectional temperature regulation. It cools the body under high temperature and keeps warmth in cold conditions, ideal for scenarios with alternating hot and cold environments. Ergonomic cut fits closely without limiting movement, easy and stable to wear. Widely used in factory workshops, outdoor operations and daily commuting. Custom sizes available, this practical thermostatic gear provides both cooling and heating performance.

Description

Specifications

Item Specifications
Product Name EC-A-024 Heat & Cold Exchange Temperature Control Vest
Product Type Temperature Control Vest / Functional Thermostatic Apparel
Fabric Composite Fabric
Core Function Heat and cold exchange temperature control, bidirectional temperature adjustment, suitable for multiple environments
Application Scenarios Factory workshop, outdoor operation, daily travel, alternating high & low temperature environments
Target Users High-temperature workers, outdoor operators, people with daily temperature control needs
Color Contact customer service for details
Size Customizable
Working time 4-8 hours per fill, about 4 hours at 35 C
Voltage 12 V DC

Inside the Water circulation system

Chilled water is pumped through a close-fitting loop against the skin. The heaviest duty of the seven routes, and the only one that carries heat away from the body instead of storing it.

How it works

  1. Chill the reservoirFill the reservoir and pre-chill it before the shift. An ice pack shortens the preparation time in extreme heat.
  2. Pump through the loopA small 12 V pump pushes water through tubing stitched against the chest and back.
  3. Heat leaves with the waterWarmed water returns to the reservoir, so body heat is removed rather than trapped in the fabric.

Compare the seven routes

TechnologyRuntimePower
Water circulation4-8 h12 V DC
PCM phase change2-4 hPassive
Peltier / TEC3-5 h12-24 V DC
Evaporative4-6 hPassive
Fan cooling8-12 h12 V DC
Battery & fan kits8-12 h12-50 V DC
New design line4-10 h12-50 V DC

Runtime and power are typical figures for the range, not guarantees for a single model. The full specification is in the table above.

Before you order

How long does one reservoir fill last?

4 to 8 hours depending on ambient temperature and pump speed. Crews on double shifts usually carry a second reservoir and swap it at the break.

Does it need ice?

No. Pre-chilled water is enough for normal summer conditions. Ice or a freezer pack is only used where radiant heat is extreme.

Can it run from a vehicle or generator?

Yes. The 12 V DC input runs from a vehicle socket, a 12 V battery pack or a standard adapter.

Applications & FAQ

How it works

A 12 V DC pump pushes chilled water from the back reservoir through four channels of press-seam tubing that sit against the chest and spine. Water returns to the reservoir, is re-cooled by the ice pack, and recirculates. Flow rate is fixed at the factory; switching the pump off converts the garment into a passive vest for breaks.

Applications

  • Foundry and steel mill floor work
  • Underground mining and tunnelling
  • Boiler rooms and utility plants
  • Outdoor construction above 40 °C

Working temperature

Rated for continuous work between 30 °C and 55 °C ambient. Below 30 °C the pump is usually switched off.

Customisation and MOQ

MOQ is 50 pieces for stock models and 200 pieces for custom colour, logo, reflective tape or packaging. Samples are ready in 7 to 10 days and bulk production takes 25 to 35 days after approval. Battery packs and fan kits carry a 12 month warranty on electrical parts.

Questions about this model

How long does the pump run on a 20,000 mAh pack?

About 8 hours at medium speed, which covers one full shift. A second pack doubles coverage for 12 hour rotations.

How do I choose a size for close-fitting wear?

Measure chest circumference and add 4 cm for the tubing layer. Size L fits a 96 to 104 cm chest; sizes run S to 3XL, and custom grading is available from 200 pieces.

Can I add reflective tape or a company logo?

Yes. Reflective tape, logo embroidery and printed panels are available from 200 pieces, with artwork approval before production.

Get More Details

For custom options, bulk pricing or lead time, please contact us.

Ask Us A Question