Integrated Pressing Cooling Vest
This integrated bonded cooling vest delivers full upper-body continuous cooling. Its one-piece heat-pressed structure enables even airflow distribution. Made of lightweight, flexible fabric, it offers comfortable wear without restricting movement.Built-in low-power fans provide long-lasting air circulation. The durable fabric ensures a long service life. Ideal for high-temperature work environments prone to heat fatigue, such as construction sites, logistics and outdoor operations.
Specifications
| Parameter | Details |
|---|---|
| Product Name | Integrated Bonded Cooling Vest |
| Material | Outer mesh fabric, inner phase-change cooling gel |
| Cooling Technology | Bonded phase-change gel (physical heat absorption, no external power required) |
| Size | Customizable (tailored to body dimensions) |
| Color | Customizable (multiple color options available) |
| Cooling Duration | 4-6 hours (varies depending on ambient temperature) |
| Recharging Method | Passive recharging (leave in cool area for 30 mins for reuse) |
| Care Instruction | Machine washable (gentle cycle, air dry; gel layer is waterproof) |
| Warranty | 1-year limited warranty |
| Custom Service | Fabric (moisture-wicking / antibacterial), color, size and logo printing are customizable |
| Weight | Approx. 350g for size M (dry state) |
| Working time | 4-6 hours per fill |
| Voltage | None, passive |
Application scenarios
Where this model is used
Inside the Evaporative system
Water-soaked fabric cools by evaporation. The lightest and lowest cost route, and the only one that needs no battery, no pump and no ice.
How it works
- Soak the panelsSubmerge the cooling panels in water for a few minutes until the fabric is fully saturated.
- Wring onceRemove the excess water so the garment does not drip during work.
- Wear and top upEvaporation does the cooling. Re-wet the panels at breaks to restore performance.
Compare the seven routes
| Technology | Runtime | Power |
|---|---|---|
| Water circulation | 4-8 h | 12 V DC |
| PCM phase change | 2-4 h | Passive |
| Peltier / TEC | 3-5 h | 12-24 V DC |
| Evaporative | 4-6 h | Passive |
| Fan cooling | 8-12 h | 12 V DC |
| Battery & fan kits | 8-12 h | 12-50 V DC |
| New design line | 4-10 h | 12-50 V DC |
Runtime and power are typical figures for the range, not guarantees for a single model. The full specification is in the table above.
Before you order
How long does it stay cool?
4 to 6 hours per fill in dry heat. Re-wetting takes a minute and needs only a tap or a bottle.
Does humidity affect performance?
Yes. Evaporative cooling works best in dry heat; in very humid conditions a fan or PCM route performs better.
Is there any power supply?
None. There is no battery, no pump and no electronics to maintain.
How it works
The outer fabric is soaked in water and stays wet for hours. Air moving across the fabric evaporates the water, which pulls heat from the body. No pump, no battery and no ice are needed; performance depends on ambient humidity.
Applications
- Outdoor construction and roofing
- Landscaping and utility crews
- Warehouse and logistics
- Dry heat regions below 40% relative humidity
Working temperature
Effective from 30 °C to 50 °C ambient when relative humidity stays below 40%; effect drops sharply above 70% humidity.
Customisation and MOQ
MOQ is 50 pieces for stock models and 200 pieces for custom colour, logo, reflective tape or packaging. Samples are ready in 7 to 10 days and bulk production takes 25 to 35 days after approval. Battery packs and fan kits carry a 12 month warranty on electrical parts.
Questions about this model
How long does an evaporative vest stay effective?
Four to six hours per fill in dry heat, and it can be re-soaked on site from any water source.
How do I choose a size for close-fitting wear?
Size L fits a 96 to 104 cm chest. The vest is worn as an outer layer, so choose your normal workwear size.
Can I add reflective tape or a company logo?
Yes, from 200 pieces, including hi-vis colourways.

